Pressure Washing for Wood Cleaning: A beginner’s Tips

When used improperly, pressure washers may cause harm to your property. Before beginning, research must be completed. If you’ve never used a pressure washer before and want a power washing service in Pearland Texas, you should go to Pressure Washing Pearland. Visit https://www.pressurewashingpearland.com for more details on our rewarding services and alluring discounts.

Your wooden deck or fence will look brand-new after a pressure wash. It’s a project you can easily finish on a weekend, which is a benefit.

You will require the following.
1. A gas-powered pressure washer; electric pressure washers are also effective but will take more time to complete the task.
2. A nozzle with a green tip and a 25-degree spray
3. Your chosen wood sealant

Before getting started on your job in earnest if this is your first time using a pressure washer, we strongly advise performing a spot test. Woods that are somewhat soft, like cedar or pine, are typically used to build decks and fences. The surface is easily removed in excess of what was planned.

Here is some advice from us on how to achieve outcomes you can be proud of.
1. Use a smooth, upward, and downward motion with the pressure washer’s wand.

2. Avoid allowing the spray to remain in one spot for the most thorough cleaning. It’s possible that you’ll need to go over the same area a few times until you get the hang of it. It is much preferable to do that than to be overly pushy and harm the wood.

3. Avoid stopping the spray mid-board. When you reach the top or bottom, wait.

4. Don’t begin spraying a board in the middle, either.

5. To prevent obvious lines, use overlapping strokes.

Once the wood has been pressure washed and dried, it is time to seal it to keep it weatherproof. Allow the wood to dry for at least a day first, though.

Pressure Washing Pearland
9307 Broadway St Suite 248
Pearland, TX 77584
Telephone: (832) 590-0910